Wireless Charger Manual

Product Specifications

• Input: 5V ⎓ 2A / 9V ⎓ 2A
• Output: 5W / 7.5W / 10W / 15W (max)
• Charging Standard: Qi-compatible
• Material: ABS
• Power Source: USB (USB-C input on charger)

How to Use

• Connect a USB-C cable to the charging pad.
• Connect the USB end of the cable to a USB wall adapter or a powered USB port.
• Plug the adapter into a power outlet.
• Place your Qi-compatible device on the charging surface.

Charging will begin automatically when the device is correctly aligned.

LED Indicator Guide

• Power on: Green light on briefly, then turns off
• Standby: No light
• Charging (standard devices): Solid green light
• Foreign object detection (FOD) / anomaly: Flashing green light

Charging SecurityBase Tracker Cards

To charge the SecurityBase tracker cards:

• Place the card slightly off centre, as shown in the picture below.
• The charging coil is located on the left side of the card, so the card may not charge if it is placed directly in the centre of the charger.
• The LED ring will become solid green when charging the card.
• Typical full charge time: approximately 1 hour.

Important Notes

• We recommend using a USB power source of at least 5V/2A. Some low-power USB ports, such as those on computers, laptops, or older wall adapters, may not provide enough power. A standard USB wall plug connected to a power socket usually works well. For faster charging, use a USB-C power adapter and cable. Charging speed depends on the adapter's power output, up to a maximum input of 15V.
• If charging other items such as phones, remove thick metal cases or magnetic objects before charging.
• Do not use in high temperatures or damp environments.
• Use only certified USB adapters for safe operation.

Safety Information

• Do not disassemble the charger.
• Keep away from liquids.
• Disconnect when not in use for extended periods.