Tracker Not Working? Troubleshooting Guide

Thanks for reaching out about the issue with your tracker. I'm happy to assist!

The good news is that, in my experience, 99% of tracker issues can be fixed without a return. Most turn out to be charging, the battery, the reset process, or phone settings (especially on Android).

Every tracker is tested before shipping, and hardware faults are very rare. When a tracker is returned as faulty, I follow the same steps outlined below: check the battery or charging, perform a reset and connect it to my test phone. In most cases, that's all it takes to get it working again.

If your tracker responds to button presses and makes sounds, this is a very strong indication that the hardware is functioning correctly. In most cases, any remaining issues can be resolved by performing a reset or correcting your phone settings.

I'm not asking you to follow these steps to make a return harder or to create extra work. It's the opposite. I regularly receive trackers reported as faulty that work perfectly once these steps are followed. I'd much rather get your tracker working today than have you pay for postage and go without it while it's sent back!

Please follow the steps carefully, even if you've tried them before. If the issue remains unresolved, I'm happy to inspect the tracker and arrange a replacement or refund if it's faulty.

Access your product's manual and videos

Please select the instructions for your exact model:

You can also browse the Product Support & Manuals page.

Troubleshooting step 1: Check the charge or battery

Our trackers ship with a mostly charged battery, however an early discharge is possible if the tracker was accidently activated during testing or is affected by a software issue (that can be resolved by a reset)

Rechargeable tracker cards:
Ensure the card is fully charged on a compatible charger, exactly as shown in the manual.

  • The card may not charge properly on non-Qi-certified chargers, including watch chargers, dual chargers and 3-in-1 style chargers. These chargers often use smaller charging coils, which can make them difficult to align with the charging coil inside the tracker card. You can check here whether your charger is Qi-certified.
  • Position the card as shown in your manual. The charging coil is towards the left side of the card, so placing it directly in the centre of the charger may prevent it from charging.
  • Check the charging indicator described in your manual. With some models, if the light switches off, it means charging is complete rather than that charging has failed - and as many cards are shipped with a nearly full charge, the led indicator of these models will only briefly light up if you just received the card.
  • Allow the tracker to charge fully before attempting the reset.

Replaceable-battery tracker tags and luggage locks: Check that the coin-cell battery is correctly installed and making contact. The locks have a battery isolation strip, ensure the entire strip has been removed. Sometimes it can tear, leaving a small piece inside the compartment that prevents contact even though the visible tab has been pulled out. If necessary, replace the battery as described in your product manual.

Rechargeable tracker tags: Fully charge the tag using the method in its manual before trying the reset. If the tracker is discharging quicker than expected, please perform the reset in the next step to resolve the issue.

Powered car trackers: Ensure the vehicle ignition is on, and the OBD port or 12 V socket is supplying power.

Troubleshooting step 2: Perform the reset; follow the exact steps in the video

If the battery is charged or replaced (depending on your model), a reset is often all that's needed when a tracker stops responding or won't reconnect.

Please open the manual for your exact product and watch the reset video with the sound turned on. 

  1. Follow the exact sequence and timing. Pay attention to the number of button presses, the pace and which press needs to be held down. The sequence differs between products and even between versions of our tracker cards.
  2. Listen for the correct confirmation sound. If you hear the deactivation-off beeps, the reset has not been completed. Check the table below for your exact card model.
  3. If you don't hear the correct confirmation, try again alongside the video. Wait as directed in the manual, switch the tracker on again if needed and repeat the sequence. I've talked many customers through the timing over the phone, and the reset has then worked by following the same steps shown in the video.
  4. Pair the tracker again. After a successful reset, follow the setup instructions in the manual. 

Reset sounds: what should you hear?

Tracker card Switched off — reset unsuccessful Successful reset Button sequence

Android Tracker Card

AusFindr Tracker Card & Tag

SecurityBase Apple Tracker Card
Purchased before 20 March 2026

2 beeps Confirmation chime Press 5 times; hold the 5th
SecurityBase Apple Tracker Card
Shipped from 20 March 2026
3 beeps Long beep Press 4 times; hold the 4th


A chime when you switch on or activate a tracker is not confirmation that you have reset it.
You must hear the reset confirmation after following the correct sequence. Please watch the video in your product manual with the audio on to get the timing right.

Please take your time with this step. When I test a card that appears unresponsive, I follow the same sequence. Very often it responds and connects to my test phone straight away.

For other tracker tags, luggage locks and car trackers, follow your own product's reset method; it may differ from the card sequences above.  

Troubleshooting step 3: Check your phone settings, then restart your phone

Android / Google Find Hub

This step is especially important for Android users. Settings and menu locations vary between phone brands and Android versions (Samsung, Pixel, Motorola, Xiaomi and others). Incorrect phone settings are a common reason why trackers aren't detected.

Quick checks:

  • Make sure Bluetooth, Wi-Fi and Location Services are turned on.
  • Check that Scan for nearby devices is enabled. On most phones, go to Settings → Google → All services → Devices. If you can't find this option, search for "nearby devices" in your phone's Settings. Bluetooth alone isn't always enough to trigger the pairing notification.
  • Make sure Google Find Hub and Google Play services are up to date.
  • Restart your phone, then try pairing your tracker again.

Still not detecting your tracker?

We've created a dedicated Android Connectivity Troubleshooting Guide with detailed instructions covering phone settings, missing pairing notifications, clearing the cache, Google account issues and other common connection problems.

Apple / Find My

Make sure your iPhone software is up to date and that Bluetooth, Location Services and Find My are enabled. Restart your iPhone, then follow your tracker's setup instructions again.

Apple provides instructions for adding a third-party item to Find My and checking its location or playing a sound.

Check your tracker's compatibility: Some models are Apple-only or Android-only. Dual-network models work with either Apple Find My or Google Find Hub, but only one network at a time.

Is your tracker connected, but its location isn't updating?

An unchanged location doesn't mean your tracker is faulty. This is different from a tracker that won't switch on or connect.

Apple Find My and Google Find Hub trackers use Bluetooth signals and nearby compatible devices to report a location. They don't provide continuous GPS updates. Location updates can be intermittent, especially when travelling, in quieter areas or where there are fewer compatible phones nearby.

If location updates are your concern, please read my article before arranging a return: How location updates work with Apple Find My and Google Find Hub trackers.

It explains what affects location update frequency and accuracy, and why a tracker can be working correctly even if its displayed location hasn't changed recently.

Still not working? I'm happy to check it for you

If you've checked the charging or battery, followed the reset video and checked your phone settings, but the tracker still doesn't work, please reply to my email. Let me know which steps you've completed, whether the tracker makes any sounds during the reset, and whether your phone can discover it.

If the issue remains unresolved, you're welcome to return the product for testing. I'll follow the same steps outlined above: check the power, perform the reset and test the tracker with my phone.

  • If the product is faulty: I'll arrange an appropriate replacement or refund, and cover reasonable return postage costs in accordance with your consumer rights and our returns policy.
  • If the product is working correctly: I'll reset and recharge it where applicable, then arrange to send it back to you. As the product isn't faulty, you'll be responsible for the postage costs to send it to me and return it to you. I'll confirm the return postage options and costs before sending it back.

This is why I ask you to follow the steps first. If all that's needed is a proper charge, reset or settings change, you can avoid the postage costs and get back to using your tracker much sooner.

As you've already contacted me, please let me know in our email conversation before sending the product back.

Return address:

SecurityBase
3106 / 17 Austin Street
Adelaide SA 5000

Please include your name, order number, phone number and a short description of the issue. Also please remove the tracker from your account before sending it back.

I'm always happy to assist, and I take genuine product faults seriously. My aim is to get your tracker working as quickly as possible, without an unnecessary return if it can be resolved at home.

Tracker Card Troubleshooting

If your tracker card is not connecting, not showing in the app or doesn't seem to charge properly, please check the steps below.

  • Make sure you are setting up the right card for your phone:

    • Apple Find My card for iPhone and Apple’s Find My app
    • Android card for Android phones and Google Find Hub

    You can confirm the version on the bottom left of the card, which will indicate 'Locate with Apple Find My or Locate with Android Find Hub'. The Apple and Android versions are different products and are not interchangeable.

    If you ordered the incorrect version, please let us know via the form below, and we can organise an exchange.

  • Make sure your phone supports the tracking network used by your card.

    • Apple cards require an iPhone with the Find My app enabled
    • Android cards require a compatible Android phone with Find Hub installed (download here) and Find My Device settings enabled

    Please ensure the phone operating system (iOS for Apple or Android) is up to date.

  • Your phone needs the right settings turned on for the tracker card to connect properly.

    • Bluetooth should be turned on
    • Wi-Fi should be enabled
    • Location Services should be turned on
    • On Android, also make sure Find My Device / Find Hub are enabled (Settings → Google → All services → Devices → Scan for nearby devices). The Android tracker requires the Scan for nearby devices setting to be on, not just Bluetooth. See this video for the key settings in Android.
    • On iPhone, make sure Find My is enabled

    Even if you are not connected to Wi-Fi, having Wi-Fi enabled can still help with location and discovery.

  • A low battery can cause the card to fail to connect properly or even become unresponsive.

    • Place the card on a wireless charger.
    • Place the card slightly off-centre, as shown in the picture in the manual for your card; the charging coil is on the left side of the card.
    • Please note that the card may not charge if it is placed directly in the centre of the charger.
  • If the card still is not connecting, restart your phone and then try the setup again. This can help refresh Bluetooth, location services and background processes that may be interfering with the connection.

  • If the card is still not connecting, perform a reset as described in step 4 in the manual and try again.

    Please note the presses for the reset sequence need to be done at the right pace (too fast or too slow won’t work) because the sequence is intentionally designed to prevent anyone who finds the card from easily disabling it.

  • The tracker card sends out a Bluetooth signal every few minutes, but the location in Find Hub / Find My may not update instantly or with every short movement. If you walk a short distance, such as to the end of the street, the app may continue showing the previous location for a while before refreshing. This is normal and helps preserve battery life. The location should update once the card is detected again and the app/network refreshes the location. Updates are more frequent in areas with more phones to detect the card.

    To test the card, take it with you to another location, such as a shopping centre, supermarket or busy public area, and check whether the tracker’s location updates after a few minutes.

    If the location is not updating after a few minutes or in a different spot, please check the following:

    • the card has enough charge
    • the card has been set up correctly
    • the card is in an area where nearby compatible devices are likely to pass by

    If the card is in a quiet area, inside a signal-blocking bag, or not near compatible devices, location updates may be less frequent. The card can only update its location when it is detected by a device that is part of the network.

    For more information, please see this page.

  • Apple Find My and Google Find Hub use nearby Apple or Android devices to securely detect your tracker and update its location in the app.

    For more detail see this page.

  • If the tracker card does not seem to be charging, first make sure it is placed correctly on a Qi certified wireless charger.

    • Place the card slightly off-centre, as shown in the picture in the manual for your card; the charging coil is on the left side of the card.
    • The card may not charge if it is placed directly in the centre of the charger.
    • Please note the card may not charge properly on non-Qi-certified chargers, including watch chargers, dual chargers and 3-in-1 style chargers. These chargers often use smaller charging coils, which can make them difficult to align with the charging coil inside the tracker card. You can check here whether your charger is Qi-certified.

    Also see the 'Charging the card' section in the manual.

Further assistance

If you have tried the steps above, checked the troubleshooting scenarios, and your tracker card still is not working as expected, please complete the form below and we are happy to assist.

We will get back to you via phone or email the same day!